Omkar Safety And Power Private Limited

Fall Protection System for Industrial Buildings shall be designed to fit the specific task of

Providing adequate safety to the roof workers against the hazards of fall from height. The system should be certified as per EN 795 class C.

The Fall Protection System designed for safety of workers working on the roof should have the following components—

1. End Anchor post.  OS1001

2. Intermediate support Brackets. OS1002

3. Wire rope.  OS1006

4. Corner passes through brackets.OS1005

5. Energy absorber.  OS1004

6. Tensioner with cable extremity.OS1003

7. Runner.  OS1007

8. Full body harness with rope lanyard. OS222

9. Work restraint Rope grab grip OSFRL01

10. Swagless Terminator OS1008

11. Rivets

12. M12 Bolts for intermediate bracket and corner

13. Eye Bolt (M12)

Rope lanyards are short pieces of arborist rope used to temporarily hold a climber in position or climb short distances

Webbing slings are usually made from polyester, and are designed to lift heavy loads.

We, Omkar Safety And Power Private Limited, are offering a wide range of vaieties in industrial and commercial safety products. We are doing this business since 2015 with extreme loyalty and honesty. We always put our customer's satisfaction in our top most priorty list.

Rope Grabs are designed as a means of fall arrest between a worker wearing a compatible full-body harness and a suitable fall arrest anchorage

Features:

• overhead lifeline for short and long span.
• Special intermediate runner on rollerruns without friction.
• Special customised anchor points.
• Self fixing anchor points requires no welding and drilling.
• Inbuild innovative 2 step energy absorber.
• Designed for multiple workers.
• Anti-rust lifeline for lifetime.
• Relevent EN standard approved.

Features:

• Waist-belt and leg loops with a large padded band that grants an enhanced comfort during suspension, and a good breathability.
• The waist belt is equipped with two lateral self-locking buckles and three positioning loops.
• Adjustable leg loops equipped with self-locking buckles.
• Attachment points made in light alloy with a shape that grants a correct position of the load.
• Ventral loop that allows to uniformly distribute the weight of the worker on the waist belt and the leg loops.

The retractable type fall arrester is a cable or webbing device, which self-retracts inside a unit to ensure that the cable or webbing remains taut at all times

The retractable type fall arrester is a cable or webbing device, which self-retracts inside a unit to ensure that the cable or webbing remains taut at all times

Features:

• Continous lifeline with variable lengths without obstruction.
• Can be installed inside and outside.
• Special customised anchor points.
• Self fixing anchor points requires no welding and drilling.
• inbuilt innovative 2 step energy absorber.
• Designed for multiple workers.
• Anti rust lifeline for lifetime.

Features:

• Single point anchor system for independent or multiple connection.
• can be fixed on wall,beams.parapets,concrete.
• Self fixing anchor points.
• can be used for permanent or temporery connection.
• Anti-rust lifeline for lifetime.
• Relevent En standard approved.

A full body harness is a harness designed to hold the wearer upright in the event of a fall from height

A full body harness is a harness designed to hold the wearer upright in the event of a fall from height